Can I Change Fluorescent Light To Led

LED lighting is the latest technological lighting advocacy on the market correct now. LEDs offering a multifariousness of outstanding benefits because they operate differently than traditional fluorescent and incandescent bulbs. Compared to the traditional forms of lighting, LEDs are not only more than durable, only they also have a prolonged lifespan and utilise only a fraction of the amount of free energy that other light bulbs on the market use.

LED'south last up to 80% longer than standard low-cal bulbs, illuminating a infinite for up to 30,000- fifty,000 hours. Similarly, LED bulbs but utilise a fraction of the electricity that other bulbs exercise, converting most of the electricity they utilize into light, wasting but a modest corporeality as heat.

LED lighting is growing in popularity because of the environmental and money-saving benefits it offers. LED lighting volition non take to be replaced often because of their long lifespan, saving customer coin while also not creating waste product. Additionally, LED bulbs volition cutting electricity bills down significantly because of the small amount of electricity they apply. Considering of these benefits, LED lighting is growing in popularity worldwide.

Equally more and more people are making the switch from fluorescent lighting to LED lighting, in that location are a number of questions that brainstorm to arise. Here is a guide to some of the most mutual questions customers take when it comes to converting fluorescent lighting into LED lighting.

Can I Employ LED Bulbs in Fluorescent Lighting Fixtures?

Usually. Almost all lighting fixtures can house LED bulbs. To ostend that LED bulbs tin can be housed in a fluorescent lighting fixture, wait for LED bulbs that are "ballast uniform," this ways that they can piece of work with the ballasts that are already installed in your current lighting fixture. Or, you tin perform a ballast bypass conversion by using a retrofit kit such every bit the Magnilumen kit, which tin exist installed in every bit quickly equally xv minutes.

Compared to incandescent, element of group vii, and fluorescent lighting, LED lighting is the all-time choice. Not simply are LED lights going to save energy and coin, but they are also brighter. Below are comparisons between standard forms of light and LED light.

T8 Fluorescent Lighting vs. T8 LED Lighting

"T" refers to tubular when referring to fluorescent lighting, and the number that follows is the diameter of the lamp in an 8th of an inch. The most popular size of fluorescent lighting is T8, meaning the tube is eight-eighths of an inch or ane inch. Other sizes of fluorescent lighting tubes include T5 and T12; these are most common in older lighting fixtures.

The same measurement applies to LED lighting when it comes to the diameter of the tube; however, T8 LEDs do non produce UV/IR calorie-free the way that T8 fluorescent calorie-free does. LED T8 lights can be housed in lighting fixtures that adjust T8 fluorescent bulbs, as their size is the aforementioned. The only differences are in the lite produced. LED T8 bulbs convert more electricity into light, acting as a more cost and energy-efficient course of lighting than T8 fluorescent lighting.

Options for Converting Fluorescent Lighting to LED

Converting from fluorescent lighting to LED lighting tin exist a confusing process, but it doesn't have to be. In fact, converting fluorescent lighting to LED lite tin be simple, especially when using a Magnilumen Magnetic Retrofit Kit. In that location are several options that are available when it comes to converting fluorescent lighting to LED Lighting, here the quickest and easiest options available:

Switch Out the Entire Lighting Fixture

Switching out an entire lighting fixture is an selection when making the switch from fluorescent lighting to LED. Nearly all-new lighting fixtures on the market today are capable of housing LED bulbs, or you can choose a lighting fixture that is specifically designed to firm an LED bulb. However, switching out an unabridged lighting fixture can become costly. Though purchasing a new troffer isn't terribly expensive, paying for the labor to have information technology installed can become pricey; this is especially truthful if you are replacing the lighting in an entire edifice.

If your lighting fixtures are in good shape and don't need to be replaced whatever time soon, it's worth your while to consider simply modifying your existing lighting fixture with a retrofit kit.

Modify The Existing Lighting Fixture

Modifying an already existing lighting fixture is more affordable than replacing an entire lighting fixture to install LED bulbs. There are various methods for converting fluorescent lighting fixtures into LED ones. However, the simplest way is to use some sort of retrofit kit. These kits adhere to already existing lighting fixtures and permit for LED bulbs to exist housed in them. There are a variety of these kinds of LED retrofit kits bachelor, a recommended pick being ZLEDLighting'due south Magnilumen Retrofit Kit, which allows a fluorescent lighting fixture to exist converted into an LED fixture in most xv minutes.

Dissimilar Sockets Present an Issue

When modifying an existing lighting fixture to business firm LED bulbs, a common problem that people oft run into is that LED bulbs use not-shunted sockets, fluorescent lighting fixtures have either non-shunted or shunted.

Shunted sockets receive voltage through one set up of wires and send information technology to both contacts. Not-shunted sockets, on the other hand, receive free energy separately. Usually, older T12 fluorescent lighting fixtures characteristic non-shunted sockets, while T8 and T5 fixtures apply shunted sockets (except for those that characteristic dimming ballasts or employ rapid showtime).

If a fluorescent fixture that you are trying to convert features a shunted socket, modifying your existing lighting fixture can exist challenging and may require an entirely new lighting fixture. Nevertheless, Magnilumen retrofit kits accept intendance of this upshot, allowing you to keep your lighting fixture. Magnilumen retrofit kits are a magnetic and quick connecting retrofit system that tin can adhere to any lighting fixture.

Ballast Bypass Conversion

Ballast Bypass Conversion very literally means that the lighting fixture must be rewired to bypass the ballast. The significant advantage of this is that an individual will not take to supervene upon the anchor when converting his or her fluorescent lighting fixture into an LED one. Magnilumen products do this, cutting down the time information technology takes to change an existing lighting fixture, also saving customers money; this is especially beneficial for extensive commercial lighting renovations and remodels.

One-end vs.Two-terminate Ballast Bypass Tubes

Ballast bypass conversions are typically easy to perform; even so, i common challenge that comes along with anchor bypass conversions is the 1-terminate vs. 2-terminate tubes. With a single-cease bulb, both the live and neutral wiring will go right to the sockets at one end of the fixture, leaving the sockets at the other end unwire.

When wiring a two-end tube, one will demand to connect all neutral wires to ane end, and all live wires to the other end. Rewiring double-terminate tubes typically takes less time.

Magnilumen Magnetic Retrofit Kits

Magnilumen Magnetic Retrofit Kits are a swell solution to modifying an already existing lighting fixture because of the little endeavour that requires the installation and the vast benefits that they provide. All Magnilumen products are magnetic, allowing for quick and easy connect mounting to any lighting fixture. Magnilumen products reduce power usage past about 50% and tin last for upwardly to 100,000 hours. Magnilumen retrofit kits also can be installed in nearly 15 minutes. Beneath is a featured image of one of the recent projects that ZLED completed, installing a Magnilumen system, allowing for the utilize of LED lighting in a fluorescent lighting fixture.

Using Magnilumen to Replace Fluorescent Bulbs

Replacing fluorescent bulbs is made easy with Magnilumen products. Magnilumen products feature several significant benefits, including:

A voltage input of 120-305VAC
Magnetic mounting and quick-connect wiring
Illumination that will last up to 100,000 hours at 150 lumens/watts.
No need to rewire a fixture
A v-year warranty
Using less free energy than fluorescent tubes

Mangilumen offers a number of sizes and designs of retrofit products:

Troffer Lighting
Indoor Signage
Vapor Tights
Emergency Backup
Retail Display
Task Lighting
High Trophy
Surface Mountain
Channel Lights
Cove Lighting
Directly and Indirect Lighting
Tamper Proof

Ways to Replace Fluorescent Light Through LED Retrofitting

When replacing fluorescent lighting with an LED retrofit kit, there are a number of different kinds and designs of kits that can be applied to existing lighting fixtures. The kind of retrofit kit an individual needs is dependent on the location of the fluorescent low-cal that is being replaced.

Fluorescent to LED Conversion Kits

There is a vast amount of fluorescent to LED conversion kits on the market place. LED conversion kits come up in many different styles and sizes and so that lighting fixtures can business firm an LED seedling. These conversion kits can get costly, specially once the cost of an electrician is factored into the price.

On average, an electrician charges $50-$100 an hour. Once the value of the electrician is added to the value of the LED conversion kit and LED bulb, the price can be a fleck high with an all-around amount of about $160-$506. Nonetheless, choosing a Mangliumen Retrofit Kit is an affordable option considering of the lack of labor it takes to install.

How to Convert 4ft Fluorescent Calorie-free to LED

At that place are various sizes and designs of retrofit kits bachelor, to ensure almost whatever fluorescent lighting fixture tin can be converted into an LED one; nonetheless, the near common fluorescent light seedling size is 4ft. Converting a 4ft Fluorescent light can be especially easy when using a Magnilumen retrofit kit; there are 7 easy steps:

Disconnect the power to the fixture(due south) from the billow box.
Remove existing fluorescent tubes and anchor embrace.
Disconnect power from the existing anchor. Anchor may exist left in the fixture. Consult electric code.
Connect the incoming power (typically black) & the neutral (typically white) to the quick disconnect supplied with the harness.
Reinstall ballast cover & bring harness out to the fixture area at ane end.
Place magnetized LED boards into the fixture, make sure to keep them counterbalanced and even.
Connect harness cadre to magnetic strips.
Turn on the ability to test your newly retrofitted fixture.

Brand the Switch to LED Lighting Today

Converting from fluorescent lighting to LED lighting has never been easier and as affordable. To learn more about our fluorescent tube retrofit kits, click here. They are available for four-foot fixtures besides as 2-, three-, and five-human foot fixtures. Nosotros likewise offer retrofit kits for several other types of fixtures, which can be found in our Products card.

Start saving coin and energy now, contact your ZLED Lighting representative today if you want to retrofit your fluorescent lights into LED ones.